Troubleshooting
283
NXA-ENET24 - Software Management Guide
Troubleshooting

Troubleshooting Chart

Symptom Action
Cannot connect using Telnet,
Web browser, or SNMP soft-
ware
• Be sure you have configured the agent with a valid IP address, subnet mask and default gateway.
• If you are trying to connect to the agent via the IP address for a tagged VLAN group, your
management station must include the appropriate tag in its transmitted frames.
• Check that you have a valid network connection to the switch and that the port you are using has
not been disabled.
• Check network cabling between the management station and the switch.
• If you cannot connect using Telnet or SSH, you may have exceeded the maximum number of
concurrent Telnet/SSH sessions permitted. Try connecting again at a later time.
Cannot access theon-board
configuration program via a
serial port connection
• Be sure you have set the terminal emulator program to VT100 compatible, 8 data bits, 1 stop bit,
no parity and 9600 bps.
• Check that the null-modem serial cable conforms to the pin-out connections provided in the
Installation Guide.
Forgot or lost the password • Contact your local distributor.