Oki 6010E manual Appendix a Troubleshooting, Main Status Indicator

Section IV - TCP/IP

Appendix A: Troubleshooting

Main Status Indicator

Upon power-up, the main status indicator flashes orange. It changes to green when the OkiLAN 6010e passes self-test. The indicator stays orange if the OkiLAN 6010e fails self-test. If the indicator turns solid orange due to an error, a configuration sheet will be printed automatically. Check the error message reported on the configuration sheet.

Restoring the OkiLAN 6010e to Factory Defaults

In most cases, the best way to restore the OkiLAN 6010e to factory defaults is via telnet. However, if you are unable to connect to the device because of a con- figuration error, use the following method which does not require a network connection.

To restore the OkiLAN 6010e to factory defaults, complete the following steps:

1.Power down the OkiLAN 6010e.

2.While holding in the Print Configuration Sheet Test button, power up the OkiLAN 6010e. Hold the button until the status indicator turns solid green.

3.Power cycle the OkiLAN 6010e. It will have restored itself to defaults.

TCP/IP

OKI OkiLAN 6010e User’s Guide IV - 61