Oki 6010E manual Telnet Configuration, Running a Telnet Session

Section IV - TCP/IP

Chapter 5: Telnet Configuration

Overview

The OkiLAN 6010e Configuration utility (telnet) provides system, network and printer status information and allows you to change the configuration of your OkiLAN 6010e.

Note: The configuration of your OkiLAN 6010e is password protected. Any user who knows the Get and Set community names can change the Telnet password. During setup we suggest the system administrator change the Get and Set community names to ensure that only authorized users can alter the configuration. See pages IV-37 through IV-39 for instructions on setting community names.

Running a Telnet Session

1.To run the configuration utility, type the following:

telnet <OkiLAN 6010e_name>

2.Replace OkiLAN 6010e_name with the IP address or the host name assigned to the OkiLAN 6010e you want to configure.

A screen will appear displaying an introduc- tory message. When prompted for a pass- word, enter Okinet. The password will not be echoed.

TCP/IP

OKI OkiLAN 6010e User’s Guide IV - 53