Section IV - TCP/IP
Unable to Assign IP Address
Gleaning
If you ping the device and are not getting a response, the glean is not working. Check the following possible problems:
∙Verify the ARP table contains the correct hardware and IP address by running the ‘ arp
∙If you are getting a response, but the OkiLAN 6010e LED is still blinking green, power down the print server and try the ping again. There might be a different device answering to the ping.
∙Verify the OkiLAN 6010e is on the same subnet as the computer running the ping.
∙The glean will not work if the OkiLAN 6010e has already defaulted to an IP address two minutes after power up. The LED will turn solid green and the device will print a configuration page. Power cycle the device and try the glean again.
IV - 62 OKI OkiLAN 6010e User’s Guide
