Section III - NetWare

Chapter 1: Introduction

Overview

This section contains instructions and information on how to configure your OkiLAN 6010e in the NetWare environment.

There are two environments in which to configure the OkiLAN 6010e:

Bindery (NetWare 3.x)

NetWare Directory Services (NDS)—for NetWare versions 4.1 and later.

Before You Start

You should be familiar with network admin- istration as well as the physical setup and operation of your network.

Write down the serial number and the Ethernet address of your OkiLAN 6010e. You will find these numbers on the OkiLAN 6010e enclosure.

Install the OkiLAN 6010e hardware and connect the cabling—see Section I. Instruc- tions for hardware installation are found in Section I of this manual.

Install the OkiNet Utility for NetWare—see Section I.

NetWare

OKI OkiLAN 6010e User’s Guide

III - 5

Page 55
Image 55
Oki 6010E manual Introduction, Before You Start