![](/images/new-backgrounds/1264938/264938129x1.webp)
Section III - NetWare
Printer Type
The Printer Type selection is used to determine the actual character string required for your printer. If your printer type is not listed, select Other and enter the character string for switching the printer to PCL or PostScript mode.
To enter nonprintable characters, enclose the ASCII value of the character in angle brackets. For example, to enter the ESC character type: <27>.
PCL Switch Sequence
Enter the character string to switch the printer to the PCL print language.
PostScript Switch Sequence
Enter the character string to switch the printer to the PostScript print language.
Configuration Page Language
Select the appropriate printer language for printing configuration pages on your printer.
Note: Do not set the Configuration Page Language to OFF for all ports of your OkiLAN 6010e. If a configu- ration sheet cannot be printed, troubleshooting abilities are limited.
Bidirectional Printer Status Support
Enable this option for enhanced status from bidirec- tional printers that support PJL.
NetWare
OKI OkiLAN 6010e User’s Guide | III - 15 |