Section IV - TCP/IP
Other Utilities
The IP address can also be set from Novell NetWare using the OkiNet for NetWare utility.
Note: The OkiNet for NetWare utilities can only be used if Novell NetWare is installed on your network.
Verifying Access to the OkiLAN 6010e
Use the ping utility to verify access to the OkiLAN 6010e.
ping <IP address of OkiLAN 6010e>
If the OkiLAN 6010e does not respond, your network or the device is not configured correctly.
∙Verify the IP address, default gateway and subnet mask are set to the proper values on the OkiLAN 6010e by printing a configura- tion sheet. This can be done using either the print configuration sheet button, through the OkiNet or OkiNet for VINES utilities or via telnet.
∙If the settings appear to be correct, try repeating the installation steps. If problems persist, call Okidata Customer Support at
IV - 16 OKI OkiLAN 6010e User’s Guide
