Section IV - TCP/IP
2.Add the name and IP address to the “/etc/ hosts” file of each host that will access the OkiLAN 6010e. Or, if your network uses a name service, add the host name and IP address to the name server.
Most TCP/IP networks use the Network Information Service (NIS), Domain Name Service (DNS) or the “/ etc/hosts” database. See your network documentation for instructions.
Configuring the OkiLAN 6010e
There are four utilities available to configure the OkiLAN 6010e for TCP/IP printing. You may use whichever utility is best suited for your needs.
∙OkiNet for TCP/IP – Windows TCP/IP print manager utility. See Chapter 3 of this section for more information.
∙OkiLAN 6010e Configuration Utility – This utility is accessed via telnet. See Chap- ter 5 of this section for more information.
In order to configure the OkiLAN 6010e via telnet, you must first assign an IP address to the OkiLAN 6010e and verify communica- tion by pinging the device.
∙OkiNet for NetWare – This windows utility must be run from a Novell NetWare client. See Section III of this manual for specific information.
IV - 10 OKI OkiLAN 6010e User’s Guide
