Section IV - TCP/IP
∙yourqueuename – This is the name of the queue on the OkiLAN 6010e and must end with 1, 2, 3 or 4 depending on the port selected to service the print jobs.
If FF, LF or NF are the last two letters of the queue name, the job will be converted accordingly. See pages 13 and 14 for more information on remote queue names.
Prerequisites
Before you proceed, verify that the following prerequi- sites are met:
1.SCO TCP/IP version 1.2 or later must be installed.
2.The name of the OkiLAN 6010e (OKIPRINTER) and the IP address you wish to assign are in the “/etc/hosts” file of the SCO machine.
3.The IP address of the OkiLAN 6010e has been assigned and you are able to telnet to OKIPRINTER successfully.
Procedure
1.Login to the SCO machine as root.
2.Install Remote Line Printing or verify that it is running by typing mkdev rlp at the UNIX prompt. It will respond by asking if you want to install or remove remote line print- ing. Choose Install even if remote line printing may already be installed.
TCP/IP
OKI OkiLAN 6010e User’s Guide | IV - 95 |