Section IV - TCP/IP
∙OKIPRINTER – The host name of the remote system which is the OkiLAN 6010e. For example, to telnet to the OkiLAN 6010e and invoke the OkiLAN 6010e Configura- tion utility, you would type telnet OKIPRINTER. A host name is not required for the OkiLAN 6010e, the IP Address may be used.
∙yourqueuename – This is the name of the queue on the OkiLAN 6010e and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs.
If FF, LF or NF are the last two letters of the queue name, the job will be converted accordingly. See pages 18 through 20 for more information on remote queue names.
Prerequisites
Before you proceed, the following prerequisites must be met:
1.The name OKIPRINTER and the IP address assigned to the OkiLAN 6010e are in the “/ etc/hosts” file on the Solaris system.
2.Make sure the LPD daemon is running on the Solaris system.
TCP/IP
OKI OkiLAN 6010e User’s Guide | IV - 101 |
