Section IV - TCP/IP
6.Pull down the Lists menu and select Exit.
7.Select the Exit SAM button.
8.Test printing to the OkiLAN 6010e with the following command:
lp –d lj4 filename
Configuring SCO UNIX for Printing with the OkiLAN 6010e
This application note describes the configuration of the printing system on the Santa Cruz Operation’s (SCO) version of the UNIX operating system. For clarity and brevity, the following specific names will be used to represent general devices or concepts.
∙lj4 – The local queue name of the SCO system to which print jobs that are destined for a printer attached to the OkiLAN 6010e will be directed.
∙OKIPRINTER – The host name of the remote system which is the OkiLAN 6010e. For example, to telnet to the OkiLAN 6010e and invoke the OkiLAN 6010e Configura- tion utility, you would type telnet OKIPRINTER. A host name is not required for the OkiLAN 6010e, the IP address may be used.
IV - 94 OKI OkiLAN 6010e User’s Guide
