Section V - Windows Printing

Chapter 2: OkiLAN 6010e Set Up for Windows NT 3.51

Overview

This section contains instruction and information on how to set up your OkiLAN 6010e for a Windows NT

3.51environment. Print options for Windows NT 3.51 include:

OkiLAN 6010e Connect for IP

OkiLAN 6010e Connect for DLC

LPR

OkiLAN 6010e Connect for IP

OkiLAN 6010e Connect for TCP/IP is a full featured utility that allows simple, direct, TCP/IP printing from your computer to a printer attached to an OKI TCP/IP enabled print server. OkiLAN 6010e Connect has advantages over other TCP/IP printing options. It allows you to print to print servers that are using Dynamic IP addresses (DHCP). It will also notify you immediately in the event of a printer error (e.g. Paper out). Print jobs printed through OkiLAN 6010e Connect are sent directly to the OkiLAN 6010e print server and not routed through a network server, resulting in a reduction of network traffic.

System Requirements

To use OkiLAN 6010e Connect for TCP/IP for your Windows NT 3.51 operating system, your computer must be configured to run TCP/IP. The OkiLAN 6010e print server must also be configured to run TCP/IP.

Windows Printing

OKI OkiLAN 6010e User’s Guide

V - 15

Page 211
Image 211
Oki 6010E manual OkiLAN 6010e Set Up for Windows NT