Oki 6010E manual Prerequisites

Section IV - TCP/IP

Prerequisites

Before you proceed, the following prerequisites must be met. Most of the time steps 2 through 5 are already configured since the HP-UX system is on a TCP/IP network. Do not perform steps 2 through 5 unless the installation procedure fails!

1.The name OKIPRINTER and the IP ad- dress assigned to the OkiLAN 6010e are in the “/etc/hosts” file on the HP-UX system.

2.Make sure the rlp process is not running by typing at the UNIX prompt:

ps –e grep rlp

If rlp is not running, you will not see any output after executing this command.

If rlp is running (that is, if you see output after executing this command), kill the process with the command:

kill –15 process_number

TCP/IP

OKI OkiLAN 6010e User’s Guide IV - 85