Oki 6010E manual Configuring HP-UX v9.xx for Printing with the OkiLAN 6010e

Section IV - TCP/IP

Configuring HP-UX v9.xx for Printing with the OkiLAN 6010e

This application note describes the configuration of the printing system on the HP-UX ver. 9.xx of the UNIX operating system. For clarity and brevity, the following specific names will be used to represent general devices or concepts.

∙lj4 – The local queue name on the HP-UX system to which print jobs will be directed. The print jobs are destined for a printer attached to the OkiLAN 6010e.

∙OKIPRINTER – The host name of the remote system which is the OkiLAN 6010e. For example, to telnet to the OkiLAN 6010e and invoke the OkiLAN 6010e Configura- tion utility, you would type telnet OKIPRINTER. A host name is not required for the OkiLAN 6010e, the IP Address may be used.

∙yourqueuename – This is the name of the queue on the OkiLAN 6010e and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs.

If FF, LF or NF are the last two letters of the queue name, the job will be converted accordingly. See pages 18 through 20 for more information on Remote Queue Names.

IV - 84 OKI OkiLAN 6010e User’s Guide