Section IV - TCP/IP
Add
Select the Add button to define access to a new OkiLAN 6010e or a group of OkiLAN 6010e print servers. The IP address must follow the format XXX.XXX.XXX.XXX, where each XXX is a number from 0 to 255. Use * to specify groups/subnets.
For example: To add a single OkiLAN 6010e, enter 198.168.42.24. To add a group of OkiLAN 6010e print servers, enter 198.168.42.*.
Delete
The Delete button deletes an OkiLAN 6010e access entry in the IP address.
Configuring the Discovery UDP Port Number
In order to discover OkiLAN 6010e print servers on the network, OkiNet for TCP/IP communicates with the OkiLAN 6010e print servers on a UDP port number. Normally, using this port number should not interfere with other devices on the network. If there are problems using the given port number, select a new number.
Note: Windows NT will not permit the use of Port 9 for discovery. Select one of the other available ports.
TCP/IP
OKI OkiLAN 6010e User’s Guide | IV - 51 |
