Oki 6010E manual IV 86 OKI OkiLAN 6010e User’s Guide

Section IV - TCP/IP

3.Make sure the following entry is in the “/etc/ inetd.conf” file:

printer stream tcp nowait root “/usr/lib/ rlpdaemon” rlpdaemon –i

If the rlp daemon is not running when a print request is made, this entry in “/etc/ inetd.conf” will tell inetd to auto-start the rlp daemon and service the pending print request. This is helpful if the daemon died or was terminated for some reason. For more information on inetd or “/etc/inetd.conf”, type man inetd or man inetd.conf.

4.Make sure the following entry is in the “/etc/ services” file:

printer 515/tcp spooler

5.Start inetd by typing the following at the UNIX prompt:

/etc/inetd –c

Procedure

HP-UX uses an interactive utility called SAM (System Administration Manager) to configure printing.

1. Login to the HP-UX system as root.

IV - 86 OKI OkiLAN 6010e User’s Guide