AMX NXA-ENET24 Mapping IP Port Priority CLI, Copy Settings, Copy IP Precedence, Priority Settings

Class of Service Configuration

FIG. 169 Web - Mapping IP Port Priority

Mapping specific values for IP Precedence is implemented as an interface configuration command, but any changes will apply to the all interfaces on the switch.

Mapping IP Port Priority - CLI

The following example globally enables IP Port Priority service on the switch, maps HTTP traffic on port 5 to CoS value 0, and then displays all the IP Port Priority settings for that port.

FIG. 170 Web - Mapping IP Port Priority

Mapping specific values for IP Precedence is implemented as an interface configuration command, but any changes will apply to the all interfaces on the switch.

Copy Settings

Use the Copy Settings page to copy IP Precedence Priority Settings, DSCP Priority Settings, and IP Port Priority Settings from a source port or trunk to a destination port or trunk.

Command Attributes

• Copy IP Precedence	Enables or disables copying IP Precedence Priority settings.
Priority Settings:

•Copy DSCP Priority Settings: Enables or disables copying DSCP Priority settings.

•Copy IP Port Priority Settings: Enables or disables copying IP Port Priority settings.

•Source Interface:Specifies the port or trunk to copy settings from.

•Destination Interface: Specifies the ports or trunks to copy settings to.

• Copy Settings: Carries out the command.

NXA-ENET24 - Software Management Guide 145