AMX NXA-ENET24 manual Command Function Copy Example Cont, Delete Syntax

CLI (Command Line Interface)

Flash/File Commands (Cont.)

Command	Function
copy	Example:
(Cont.)	The following example shows how to copy the running configuration to a startup file:
	Console#copy running-config file
	destination file name: startup
	Write to FLASH Programming.
	\Write to FLASH finish.
	Success.
	Console#
	Example:
	The following example shows how to download a configuration file:
	Console#copy tftp startup-config
	TFTP server ip address: 10.1.0.99
	Source configuration file name: startup.01
	Startup configuration file name [startup]:
	Write to FLASH Programming.
	\Write to FLASH finish.
	Success.
	Console#
	Example:
	This example shows how to copy a secure-site certificate from an TFTP server. It then
	reboots the switch to activate the certificate:
	Console#copy tftp https-certificate
	TFTP server ip address: 10.1.0.19
	Source certificate file name: SS-certificate
	Source private file name: SS-private
	Private password: ********
	Success.
	Console#reload
	System will be restarted, continue <y/n>? y
	Example:
	This example shows how to copy a public-key used by SSH from an TFTP server. Note
	that public key authentication via SSH is only supported for users configured locally on the
	switch:
	Console#copy tftp public-key
	TFTP server IP address: 192.168.1.19
	Choose public key type:
	1. RSA: 2. DSA: <1-2>: 1
	Source file name: steve.pub
	Username: steve
	TFTP Download
	Success.
	Write to FLASH Programming.
	Success.
	Console#
delete	Syntax:
This command	delete [unit:] filename
deletes a file or	• filename - Name of the configuration file or image name.
image.	• unit - Stack unit. (Range: 1-8)
	Default Setting: None
	Command Mode: Privileged Exec
	Command Usage: If the file type is used for system startup, then this file cannot be
	deleted.
	• “Factory_Default_Config.cfg” cannot be deleted.
	• A colon (:) is required after the specified unit number.
	Example: This example shows how to delete the test2.cfg configuration file from flash
	memory for unit 1:
	Console#delete 1:test2.cfg
	Console#

194 NXA-ENET24 - Software Management Guide