AMX NXA-ENET24 manual Snmp Commands, Command Function Snmp-server Default Setting Enabled

CLI (Command Line Interface)

SNMP Commands

Controls access to this switch from management stations using the Simple Network Management Protocol (SNMP), as well as the error types sent to trap managers.

SNMPv3 provides security features that cover message integrity, authentication, and encryption; as well as controlling user access to specific areas of the MIB tree. To use SNMPv3, first set an engine ID (or accept the default), specify read and write access views for the MIB tree, configure SNMP user groups with the required security model (i.e., SNMP v1, v2c or v3) and security level (i.e., authentication and privacy), and then assign SNMP users to these groups, along with their specific authentication and privacy passwords.

SNMP Commands

Command	Function
snmp-server	Default Setting: Enabled
This command enables the	Command Mode: Global Configuration
SNMPv3 engine and ser-	Example:
vices for all management	Console(config)#snmp-server
clients (i.e., versions 1, 2c,	Console(config)#
3).
Use the no form to disable
the server.
show snmp	Default Setting: None
This command checks the	Command Mode: Normal Exec, Privileged Exec
status of SNMP	Command Usage: This command provides information on the community
communications.	access strings, counter information for SNMP input and output protocol data
	units, and whether or not SNMP logging has been enabled with the snmp-server
	enable traps command.
	Example:
	Console#show snmp
	System Contact: Joe
	System Location: Room 23
	SNMP traps:
	Authentication: enabled
	Link-up-down: enabled
	SNMP communities:
	1.	private, and the privilege is read-write
	2.	public, and the privilege is read-only
	0 SNMP packets input
	0	Bad SNMP version errors
	0	Unknown community name
	0	Illegal operation for community name supplied
	0	Encoding errors
	0	Number of requested variables
	0	Number of altered variables
	0	Get-request PDUs
	0	Get-next PDUs
	0	Set-request PDUs
	0 SNMP packets output
	0	Too big errors
	0	No such name errors
	0	Bad values errors
	0	General errors
	0	Response PDUs
	0	Trap PDUs
	SNMP logging: disabled
	Console#

224 NXA-ENET24 - Software Management Guide