AMX NXA-ENET24 manual Command Function Show snmp view, Snmp-server group Syntax

CLI (Command Line Interface)

SNMP Commands (Cont.)

Command	Function
show snmp view	Command Mode: Privileged Exec
Use this command to show	Example:
information on the SNMP	Console#show snmp view
groups.	View Name: mib-2
	Subtree OID: 1.2.2.3.6.2.1
	View Type: included
	Storage Type: nonvolatile
	Row Status: active
	View Name: defaultview
	Subtree OID: 1
	View Type: included
	Storage Type: nonvolatile
	Row Status: active
	Console#
	• View Name: Name of an SNMP view.
	• Subtree OID: A branch in the MIB tree.
	• View Type: Indicates if the view is included or excluded.
	• Storage Type: The storage type for this entry.
	• Row Status: The row status of this entry.
snmp-server group	Syntax:
Use this command to add an	snmp-server group groupname {v1 v2c v3 {auth noauth priv}}
SNMP group, mapping	[read readview] [write writeview]
	no snmp-server group groupname
SNMP users to SNMP
	• groupname - Name of an SNMP group. (Range: 1-32 characters)
views.
	• v1 v2c v3 - Use SNMP version 1, 2c or 3.
Use the no form to remove
	• auth noauth priv - This group uses SNMPv3 with authentication, no
an SNMP group.
	authentication, or with authentication and privacy.
	• readview - Defines the view for read access. (1-64 characters)
	• writeview - Defines the view for write access. (1-64 characters)
	Default Settings:
	• readview - Every object belonging to the Internet OID space (1.3.6.1).
	• writeview - Nothing is defined.
	Command Mode: Global Configuration
	Command Usage: A group sets the access policy for the assigned users.
	• When authentication is selected, the MD5 or SHA algorithm is used as
	specified in the snmp-server user command.
	• When privacy is selected, the DES 56-bit algorithm is used for data encryption.
	Example:
	Console(config)#snmp-server group r&d v3 auth write daily
	Console(config)#

228 NXA-ENET24 - Software Management Guide