AMX NXA-ENET24 manual Command Function Snmp-server user Syntax, Show snmp user

CLI (Command Line Interface)

SNMP Commands (Cont.)

Command	Function
snmp-server user	Syntax:
Use this command to add a	snmp-server user username groupname {v1 v2c v3 [encrypted]
user to an SNMP group,	[auth {md5 sha} auth-password [priv des56 priv-password]]
	no snmp-server user username
restricting the user to a
	• username - Name of user connecting to the SNMP agent. (Range: 1-32
specific SNMP Read and a
	characters)
Write View.
	• groupname - Name of an SNMP group to which the user is assigned. (Range:
Use the no form to remove a
user from an SNMP group.	1-32 characters)
	• v1 v2c v3 - Use SNMP version 1, 2c or 3.
	• encrypted - Accepts the password as encrypted input.
	• auth - Uses SNMPv3 with authentication.
	• md5 sha - Uses MD5 or SHA authentication.
	• auth-password - Authentication password. Enter as plain text if the encrypted
	option is not used. Otherwise, enter an encrypted password. (A minimum of
	eight characters is required.)
	• priv des56 - Uses SNMPv3 with 56-bit DES data encryption.
	• priv-password - Privacy password. Enter as plain text if the encrypted option is
	not used. Otherwise, enter an encrypted password.
	Default Setting: None
	Command Mode: Global Configuration
	Command Usage: The SNMP engine ID is used to compute the authentication/
	privacy digests from the password. You should therefore configure the engine ID
	with the snmp-server engine-id command before using this configuration com-
	mand.
	SNMP passwords are localized using the authoritative SNMP engine ID.
	Example:
	Console(config)#snmp-server user steve group r&d v3 auth md5
	greenpeace priv des56 einstien
	Console(config)#
show snmp user	Command Mode: Privileged Exec
Use this command to show	Example:
information on SNMP users.	Console#show snmp user
	EngineId: 01000000000000000000000000
	User Name: steve
	Authentication Protocol: md5
	Privacy Protocol: des56
	Storage Type: nonvolatile
	Row Status: active

Console#

•EngineId: String identifying the engine ID.

•User Name: Name of user connecting to the SNMP agent.

•Authentication Protocol: The authentication protocol used with SNMPv3.

•Privacy Protocol: The privacy protocol used with SNMPv3.

•Storage Type: The storage type for this entry.

•Row Status: The row status of this entry.

230 NXA-ENET24 - Software Management Guide