AMX NXA-ENET24 manual Command Function Snmp-server engine-id Syntax, Show snmp engine-id

	CLI (Command Line Interface)
SNMP Commands (Cont.)
Command	Function
snmp-server engine-id	Syntax:
Use this command to	snmp-server engine-id local engineid-string
configure an identification	no snmp-server engine-id local
	• engineid-string - String identifying the engine ID. (Range: 1-26 hexadecimal
string for the SNMP v3
	characters)
engine.
	Default Setting: A unique engine ID is automatically generated by the switch
Use the no form to restore
the default.	based on its MAC address.
	Command Mode: Global Configuration
	Command Usage: An SNMP engine is an independent SNMP agent that
	resides on this switch. This engine protects against message replay, delay, and
	redirection. The engine ID is also used in combination with user passwords to
	generate the security keys for authenticating and encrypting SNMPv3 packets.
	Trailing zeroes need not be entered to uniquely specify a engine ID. In other
	words, the value “1234” is equivalent to “1234” followed by 22 zeroes.
	A local engine ID is automatically generated that is unique to the switch. This is
	referred to as the default engine ID. If the local engineID is deleted or changed,
	all SNMP users will be cleared. You will need to reconfigure all existing users
	(page 112).
	Example:
	Console(config)#snmp-server engineID local 12345
	Console(config)#
show snmp engine-id	Command Mode: Privileged Exec
Use this command to show	Example: This example shows the default engine ID:
the SNMP engine ID.	Console#show snmp engine-id
	Local SNMP engineID: 8000002a8000000000e8666672
	Local SNMP engineBoots: 1
	• Local SNMP engineID: String identifying the engine ID.
	• Local SNMP engineBoots: The number of times that the engine has (re-
	)initialized since the snmpEngineID was last configured.
snmp-server view	Syntax:
Use this command to add an	snmp-server view view-name oid-tree {included excluded}
SNMP view that controls	no snmp-server view view-name
	• view-name - Name of an SNMP view. (Range: 1-64 characters)
user access to the MIB.
	• oid-tree - Object identifier of a branch within the MIB tree. Wildcards can be
Use the no form to remove
	used to mask a specific portion of the OID string. (Refer to the examples.)
an SNMP view.
	• included - Defines an included view.
	• excluded - Defines an excluded view.
	Default Setting: defaultview (includes access to the entire MIB tree)
	Command Mode: Global Configuration
	Command Usage: Views are used in the snmp-server group command to
	restrict user access to specified portions of the MIB tree.
	The predefined view “defaultview” includes access to the entire MIB tree.
	Example: This view includes MIB-2:
	Console(config)#snmp-server view mib-2 1.3.6.1.2.1 included
	Console(config)#
	Example: This view includes the MIB-2 interfaces table, ifDescr. The wildcard is
	used to select all the index values in this table:
	Console(config)#snmp-server view ifEntry.2 1.3.6.1.2.1.2.2.1.*.2
	included
	Console(config)#
	Example: This view includes the MIB-2 interfaces table, and the mask selects
	all index entries:
	Console(config)#snmp-server view ifEntry.a 1.3.6.1.2.1.2.2.1.1.*
	included
	Console(config)#

NXA-ENET24 - Software Management Guide 227