3Com MSR 30, MSR 50 manual Timer join-prune IPv6 PIM view, Timer spt-switch IPv6 PIM view

1502 CHAPTER 93: IPV6 PIM CONFIGURATION COMMANDS

View IPv6 PIM view

Parameter interval: Hello interval in seconds, with an effective range of 1 to 2,147,483,647.

Description Use the timer hello command to configure the hello interval globally. Use the undo timer hello command to restore the default setting. By default, hello messages are sent at the interval of 30 seconds.

Related command: pim ipv6 timer hello.

Example # Set the global hello interval to 40 seconds.

<Sysname> system-view

[Sysname] pim ipv6

[Sysname-pim6] timer hello 40

timer join-prune (IPv6 PIM view)

Syntax timer join-prune interval

undo timer join-prune

View IPv6 PIM view

Parameter interval: Join/prune interval in seconds, with an effective range of 1 to 2,147,483,647.

Description Use the timer join-prunecommand to configure the join/prune interval globally. Use the undo timer join-prunecommand to restore the default setting.

By default, the join/prune interval is 60 seconds.

Related command: pim ipv6 timer join-prune.

Example # Set the global join/prune interval to 80 seconds.

<Sysname> system-view

[Sysname] pim ipv6

[Sysname-pim6] timer join-prune 80

timer spt-switch (IPv6 PIM view)

Syntax timer spt-switch interval

undo timer spt-switch