3Com MSR 50, MSR 30 manual Display bgp ipv6 routing-table as-path-acl, 1231

1231

Table 291 Description on the fields of the display bgp ipv6 routing-table command

Field	Description
Status codes	Status codes:
	* - valid
	> - best
	d - damped
	h - history
	i - internal (IGP)
	s - summary suppressed (suppressed)
	S - Stale
Origin	i - IGP (originated in the AS)
	e - EGP (learned through EGP)
	? - incomplete (learned by other means)
Network	Destination network address
PrefixLen	Prefix length
NextHop	Next Hop
MED	MULTI_EXIT_DISC attribute
LocPrf	Local preference value
Path	AS_PATH attribute, recording the ASs the packet has passed to avoid
	routing loops
PrefVal	Preferred value
Label	Label
Ogn	Origin attribute of the route, which can take on one of the following
	values:
	i	Indicates that a route is interior to the AS.
		Summary routes and the routes configured using the
		network command are considered IGP routes.
	e	Indicates that a route is learned from the exterior
		gateway protocol (EGP).
	?	Short for INCOMPLETE. It indicates that the origin of a
		route is unknown and the route is learned by other

means. BGP sets Origin attribute of routes learned from other IGP protocols to INCOMPLETE.

display bgp ipv6 routing-table as-path-acl

Syntax display bgp ipv6 routing-table as-path-acl as-path-acl-number

View Any view

Parameters as-path-acl-number: Number of an AS path ACL permitted by which to display routing information, ranging from 1 to 256.

Description Use the display bgp ipv6 routing-table as-path-acl command to display routes filtered through the specified AS path ACL.