3Com MSR 30 Data-size, Description any NQA test type view, Syntax data-size size Undo data-size

2266 CHAPTER 149: NQA CLIENT CONFIGURATION COMMANDS

data-size

Syntax data-size size

undo data-size

View ICMP-echo/UDP-echo/UDP-jitter test type view

Parameter size: Size of a probe packet in bytes, in the range 20 to 8100 for an ICMP-echo or a UDP-echo test and in the range 68 to 8100 for a UDP-jitter test.

Description Use the data-sizecommand to configure the size of a probe packet sent, namely, the size of a packet sent (IP header and ICMP header excluded) in a probe.

Use the undo data-sizecommand to restore the default.

By default, the size of a probe packet is 100 bytes.

Example # Configure the size of an ICMP-echo probe packet as 80 bytes.

<Sysname> system-view [Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] data-size 80

description (any NQA test type view)

Syntax description text

undo description

View Any NQA test type view

Parameter text: Descriptive string of a test group, in the range 1 to 200 characters. It is case sensitive.

Description Use the description command to give a brief description of a test group, usually, the test type or test purpose of a test group.

Use the undo description command to remove the configured description information.

By default, no descriptive string is available for a test group.

Example # Configure the descriptive string for a test group as icmp-probe.

<Sysname> system-view [Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] description icmp-probe