3Com MSR 30 Display link-aggregation verbose, Syntax display link-aggregation verbose agg-id

476CHAPTER 27: LINK AGGREGATION CONFIGURATION COMMANDS

You may find that information about the remote system for a manual link aggregation group is either replaced by none or not displayed at all. This is normal because this type of aggregation group has no knowledge of its partner.

Example # Display the link aggregation group summary.

<Sysname> display		link-aggregation summary
Aggregation	Group	Type: S -- Static, M	-- Manual
Loadsharing	Type:	Shar -- Loadsharing,	NonS -- Non-Loadsharing
Actor ID: 0x8000,		00e0-fcff-ff04

AL	AL	Partner ID	Select	Unselect		Share	Master
ID	Type		Ports Ports		Type	Port
-------------------------------------------------------------------
10	M	none	1	0	NonS		Ethernet1/2
20	S	0x8000,00e0-fcff-ff01 1		0	NonS		Ethernet1/3
Table 74 Description on the fields of display link-aggregation summary
Field			Description
Aggregation Group Type			Aggregation group type.
			■ S: static LACP aggregation
			■ M: manual aggregation
Loadsharing Type			Load sharing type, which can be “Shar” (for load sharing)
			and “NonS” (for non-load sharing).
Actor ID			Local system ID
AL ID			Link aggregation group ID
AL Type			Link aggregation type, which can be dynamic LACP
			aggregation, static LACP aggregation, or manual
			aggregation.
Partner ID			Remote system ID
Select Ports			Number of selected ports
Unselect Ports			Number of unselected ports
Share Type			Load sharing type
Master Port			Master port

display link-aggregation verbose

Syntax display link-aggregation verbose [ agg-id]

View Any view

Parameter agg-id: ID of an existing link aggregation group, in the range 1 to 144.

Description Use the display link-aggregation verbose command to display detailed information about the specified or all link aggregation groups.

You may find that information about the remote system for a manual link aggregation group is either replaced by none or not displayed at all. This is normal because this type of aggregation group has no knowledge of its partner.

Example # Display detailed information about all the link aggregation groups.