3Com MSR 50 Bootp Client Configuration Commands, Including sub-interfaces and Vlan interfaces

BOOTP CLIENT CONFIGURATION

55 COMMANDS

n	■ BOOTP client configuration can only be used on Layer 3 Ethernet interfaces
	(including sub-interfaces) and VLAN interfaces.
	■ If several VLAN interfaces sharing the same MAC address obtain IP addresses
	through a BOOTP relay agent, the BOOTP server cannot be a Windows 2000
	Server or Windows 2003 Server.
	■ You are not recommended to enable both the DHCP client and the DHCP
	Snooping on the same device. Otherwise, DHCP Snooping entries may fail to
	be generated, or the BOOTP client may fail to obtain an IP address.
c CAUTION: The support for the DHCP Snooping function varies with devices.
display bootp client
Syntax	display bootp client [ interface interface-type interface-number ]
View	Any view
Parameter	interface interface-typeinterface-number: Displays the BOOTP client information
	of the interface.
Description	Use the display bootp client command to display related information about a
	BOOTP client.
	Note:
	■ If interface interface-typeinterface-numberis not specified, the command will
	display information about BOOTP clients on all interfaces.
	■ If interface interface-typeinterface-numberis specified, the command will
	display information about the BOOTP client on the specified interface.
Example	# Display related information about the BOOTP client on Ethernet1/0.
	<Sysname> display bootp client interface ethernet 1/0
	Ethernet1/0 BOOTP client information:
	Allocated IP: 169.254.0.2 255.255.0.0

Transaction ID = 0x3d8a7431

Mac Address 00e0-fc0a-c3ef