3Com MSR 50, MSR 30 manual Display atm map-info, 295

295

Table 24 Description on the fields of the display atm interface command

Field	Description
PVCs	Number of PVCs configured on the
	interface
MAPs	Number of maps on the interface
input pkts: 0, input bytes: 0, input pkt errors: 0	Received packets, bytes, and errors
output pkts: 69, output bytes: 2218, output pkt	Transmitted packets, bytes, and errors
errors: 8

display atm map-info

Syntax display atm map-info[ interface interface-type interface-number [ pvc { pvc-name [ vpi/vci ] vpi/vci } ] ]

View Any view

Parameter interface-typeinterface-number: Specifies an interface by its type and number.

pvc-name: PVC name, a unique string of 1 to 16 characters on ATM interface, not case-sensitive. The name cannot be the same as a valid VPI/VCI value pair. For example, the name 1/20 is not allowed.

vpi/vci: VPI/VCI pair. VPI is short for virtual path identifier; its value ranges from 0 to 255. VCI is short for virtual channel identifier; its value range varies by interface type. Normally, VCI values from 0 to 31 are reserved for special purpose, you are not recommended to use them. For details regarding the value range, refer to Table 28.

Description Use the display atm map-infocommand to view the map information on an ATM interface.

Note that:

■Without an interface specified, the system displays the map information for all ATM interfaces.

■Without specifying the PVC name or the VPI/VCI value pair, the system displays the map information of all PVCs on the specified ATM interface.

Example # Display map information for all ATM interfaces.

<Sysname> display atm map-info

Atm1/0, PVC 1/32, PPP, Virtual-Template10, UP Atm1/0, PVC 1/33, IP & Mask, State UP 100.11.1.1, mask 255.255.0.0, vlink 1 Atm1/0, PVC 2/101, ETH, Virtual-Ethernet1, UP

Table 25 Description on the fields of the display atm map-info command

Field	Description
Atm1/0	Interface number
PVC 1/33	PVC identifier