3Com MSR 30, MSR 50 manual Display interface dialer number, Number Dialer interface number

332CHAPTER 20: DCC CONFIGURATION COMMANDS

Table 31 Description on the fields of the display dialer command

Field	Description
Enable	Timer set by the dialer timer enable command
Idle	Timer set by the dialer timer idle command
Wait-for-carrier	Timer set by the dialer timer wait-carrier command
Total Channels	Total number of channels on the interface
Free Channels	Number of free channels

display interface dialer

Syntax	display interface dialer [ number ]
View	Any view
Parameters	number : Dialer interface number.
Description	Use the display interface dialer command to display the information about a
	dialer interface. If you do not provide this argument, this command displays the
	information about all the dialer interfaces.
Examples	# Display the information about all the dialer interfaces.
	<H3C> display interface dialer
	Dialer1 current state: UP
	Line protocol current state: UP (spoofing)
	Description: Dialer1 Interface
	The Maximum Transmit Unit is 1500, Hold timer is 10(sec)
	Internet protocol processing : disabled
	Link layer protocol is PPP
	LCP initial
	Physical is Dialer, baudrate: 64000 bps
	Output queue : (Urgent queuing : Size/Length/Discards)		0/50/0
	Output queue : (Protocol queuing : Length) 0/500/0
	Output queue : (FIFO queuing : Size/Length/Discards)		0/75/0
	Last 300 seconds input:	0 bytes/sec 0 packets/sec
	Last 300 seconds output:	0 bytes/sec 0 packets/sec
	0 packets input, 0 bytes, 0 drops
	0 packets output, 0 bytes, 0 drops
	Table 32 Description on the fields of the display interface dialer command
	Field	Description
	current state	Physical state of a dialer interface (up/down)
	Line protocol current state	Data link layer protocol state of the dialer interface
		(up/down)
	Description	Interface description
	The Maximum Transmit Unit	MTU of the dialer interface
	Internet protocol processing	Network layer protocol state of the dialer interface
		(enabled/disabled)
	Link layer protocol is PPP	Current data link layer protocol