3Com MSR 50, MSR 30 manual Mpls TE Configuration Commands, Add hop

MPLS TE CONFIGURATION

96 COMMANDS

n MPLS TE is available on these interfaces: synchronous/asynchronous serial interface (Serial), asynchronous serial interface (Async), Layer 3 Ethernet interface (Ethernet, GE, XGE), ATM interface, POS interface, Layer 3 virtual Ethernet interface (Virtual-Ethernet), virtual template interface, MP group interface, MFR interface, tunnel interface, and VLAN interface.

add hop

Syntax add hop ip-address1 [ include [ loose strict ] exclude ] { after before } ip-address2

View Explicit path view

Parameter ip-address1: IP address or Router ID of the node to be inserted in the explicit path, in dotted decimal notation.

include: Includes the specified IP address in the explicit path.

loose: Indicates that the next hop is a loose node which is not necessarily directly connected to the specified node.

strict: Indicates that the next hop is a strict node which must be directly connected to the specified node.

exclude: Excludes the node identified by the ip-address1argument from the explicit path. Excluded addresses are not considered in path calculation.

after: Inserts the node identified by the ip-address1argument after the reference node.

before: Inserts the node identified by the ip-address1argument before the reference node.

ip-address2: IP address of the reference node, in dotted decimal notation.

Description Use the add hop command to insert a node to the explicit path.

By default, the specified node is included in the explicit path and its next hop is a strict node.

Example # Insert 3.3.29.3 behind 3.3.10.5 on the explicit path PL and exclude this IP address in path calculation.