3Com MSR 50, MSR 30 manual Vrrp vrid timer advertise, Vrrp vrid track, 2233

2233

vrrp vrid timer advertise

Syntax vrrp vrid virtual-router-id timer advertise adver-interval undo vrrp vrid virtual-router-id timer advertise

View Interface view

Parameter virtual-router-id: VRRP standby group number, in the range 1 to 255.

adver-interval: Interval at which the master in the specified standby group sends VRRP advertisements. It ranges from 1 to 255 seconds.

Description Use the vrrp vrid timer advertise command to configure the interval for Master in the specified standby group to send VRRP advertisements.

Use the undo vrrp vrid timer advertise command to restore the default.

By default the interval for Master in the specified standby group to send VRRP advertisements is 1 second.

Note that:

■Before executing the command, create a standby group on an interface and configure the virtual IP address of the standby group.

■Routers in the same VRRP standby group must use the same Adver_Timer setting.

Example # Set the master in standby group 1 to send VRRP advertisements at intervals of five seconds.

<Sysname> system-view

[Sysname] interface ethernet 1/0 [Sysname-Ethernet1/0] vrrp vrid 1 virtual-ip 10.1.1.1

[Sysname-Ethernet1/0] vrrp vrid 1 timer advertise 5

vrrp vrid track

Syntax vrrp vrid virtual-router-id track track-entry-number [ reduced priority-reduced ] undo vrrp vrid virtual-router-id track [ object-number ]

View Interface view

Parameters virtual-router-id: VRRP standby group number, in the range 1 to 255.

track track-entry-number: Specifies a Track object to be monitored by its number. track-entry-numberranges from 1 to 1024.