3Com MSR 50, MSR 30 manual Timer ring-back, Timer wait-digit, Related command hookoff-mode, 2613

2613

off-hook, the bound FXO voice subscriber line goes off-hook, too. When the FXS voice subscriber line in the off-hook state needs to connect the FXO voice subscriber line to originate a call over PSTN, the FXO voice subscriber line must first perform an on-hook operation, and then perform an off-hook operation to send the called number.

Related command: hookoff-mode.

Example # Set the interval from on-hook to off-hook for FXO voice subscriber line 1/0 to 600 milliseconds.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] subscriber-line 1/0

[Sysname-voice-line1/0] timer hookoff-interval 600

timer ring-back

Syntax timer ring-back seconds

undo timer ring-back

View FXS/FXO/E&M voice subscriber line view

Parameter seconds: Maximum duration in seconds of playing ringback tone, in the range of 5 to 120.

Description Use the timer ring-backcommand to configure the maximum duration of playing the ringback tone.

Use the undo timer ring-backcommand to restore the default.

By default, the maximum duration of playing the ringback tone is 60 seconds.

This command applies only on interfaces that are analog E&M, digital E&M, FXS, or FXO.

Example # Set the maximum time duration of playing ringback tones to eight seconds.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] subscriber-line 1/0 [Sysname-voice-line1/0] timer ring-back 8

timer wait-digit

Syntax timer wait-digit { seconds infinity }

undo timer wait-digit