3Com MSR 30, MSR 50 manual Reset xot

438CHAPTER 26: LAPB AND X.25 CONFIGURATION COMMANDS

View User view

Parameter x121-address: Destination X.121 address, a string of 1 to 15 numerical characters.

Description Use the pad command to establish a X.25 PAD connection and logon to the remote site.

PAD is similar to telnet. It can establish the connection from the local to the remote through the remote X121 address to carry out configuration operations.

Example # Establish a PAD connection to the destination X.121 address 2.

<Sysname> pad 2

reset xot

Syntax reset xot local local-ip-address local-port remote remote-ip-address remote-port

View User view

Parameter local-ip-address: Local IP address of the XOT connection. local-port: Local port number of the XOT connection. remote-ip-address: Remote IP address of the XOT connection. remote-port: Remote port number of the XOT connection.

Description For SVC, use the reset xot command to clear an XOT link.

For PVC, use the reset xot command to reset an XOT link.

When you clear or reset the XOT link, you can obtain the required ports using the display x25 xot or display tcp status command.

Example # Clear or reset the XOT link.

<Sysname> reset xot local 10.1.1.1 1998 remote 10.1.1.2 1024

reset x25

Syntax reset x25 { counters interface interface-type interface-number vc interface interface-type interface-number [ vc-number ] }

View User view

Parameter counters: Resets interface statistics. vc: Resets X.25 virtual circuit.