3Com MSR 50, MSR 30 manual Ipx route load-balance-path, 2543

2543

Parameter dest-network: Destination network ID of the IPX static route, an 8-digit hexadecimal number, ranging from 0x1 to 0xFFFFFFFE.

network.node: Next hop address of the IPX static route. network is an 8-digit hexadecimal number in the range 0x1 to 0xFFFFFFFD. The 48-bit node consists of three 4-digit hexadecimal numbers, separated by “-”; when entered, the leftmost 0s can be omitted.

interface-typeinterface-number: Type and number of the outgoing interface that must support PPP encapsulation. It can be a Serial or POS interface.

preference value: Route preference, in the range of 1 to 255. The smaller the value, the higher the preference. The preference of directly connected routes is fixed to 0 and cannot be changed. By default, the preference of IPX static routes is 60 and can be configured. The preference of dynamic IPX routes is fixed to 100 and cannot be changed.

tick ticks: Time needed to reach the destination network (1 tick = 1/18 second)., ranging from 1 to 65,534. The default is 1. When the tick value of the outgoing interface is modified, the tick value of the corresponding static route will also be changed. The ticks must be configured together with the hops.

hops: Number of routers on the route to the destination network, in the range 1 to 15. By default, the value is 1. It must be configured together with the ticks argument.

all: All IPX static routes.

Description Use the ipx route-staticcommand to configure an IPX static route.

Use the undo ipx route-staticcommand to remove an IPX static route.

The IPX static route with a destination network ID of 0xFFFFFFFE is the default route.

Example # Configure an IPX static route with destination network ID being 0x5a, the next hop being 1000.0-0c91-f61f, ticks 10 and hops 2.

<Sysname> system-view

[Sysname] ipx route-static 5a 1000.0-0c91-f61f tick 10 hop 2

ipx route load-balance-path

Syntax ipx route load-balance-path paths

undo ipx route load-balance-path

View System view

Parameter paths: Maximum number of equivalent routes for load balancing, ranging from 1 to 64.