3Com MSR 50, MSR 30 manual Vi-card reboot, Syntax vi-card reboot slot-number, 2619

2619

freq1 and freq2: Two frequencies in Hz. The frequency range is related to the combination mode. In the case of frequency superimposition or alternation, the two frequencies fall in the range of 300 Hz to 3,400 Hz. In the case of frequency modulation, the two frequencies fall in the range of 300 Hz to 3,400 Hz, and the sum of and the absolute difference between the two frequencies also fall in this range.

time1: Make time for the first make-to-break ratio in milliseconds, in the range of 30 to 8,192. In the case of continuous play, the value is 8,192.

time2: Break time for the first make-to-break ratio in milliseconds, 0 or 30 through 8,191.

time3: Make time for the second make-to-break ratio in milliseconds, 0 or 30 through 8,191.

time4: Break time for the second make-to-break ratio in milliseconds, 0 or 30 to 8,191.

index: Index of busy tone type, in the range of 0 to 3.

Description Use the vi-cardcptone-customcommand to configure parameters for a customized call progress tone.

Use the undo vi-cardcptone-customcommand to remove the configuration.

By default, no customized call progress tone is configured.

After you configure parameters for a customized call progress tone, they do not take effect immediately. They do only after you execute the cptone country-type CS command in voice view.

Example # Customize parameters for a busy tone, with the two frequencies both being 425 Hz, and the make time and break time both being 350 milliseconds.

<sysname> system-view [sysname] voice-setup

[sysname-voice] vi-card cptone-custom busy-tone 0 425 425 350 350 350 350

vi-card reboot

Syntax vi-card reboot slot-number

View Voice view

Parameter slot-number: Number of the slot where the voice card is located.

Description Use the vi-card reboot command to reboot a voice card.

First use command display version or display device to display the distributed slots of the voice cards in the router.