3Com MSR 50, MSR 30 manual 152, NTP Configuration Commands, Display ntp-service sessions

152

NTP CONFIGURATION COMMANDS

display ntp-service sessions

Syntax display ntp-service sessions [ verbose ]

View Any view

Parameter verbose: Displays the detailed information of all NTP sessions.

Description Use the display ntp-service sessions command to view the information of all NTP sessions. Without the verbose keyword, this command will display only the brief information of all NTP service sessions.

Example # View the brief information of NTP service sessions.

<Sysname> display	ntp-service	sessions
source	reference	stra reach poll now offset delay disper

************************************************************************

[12345]1.1.1.1 127.127.1.0 3 377 512 178 0.0 40.1 22.8 note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured Total associations : 1

Table 605 Description on the fields of the display ntp-service sessions command

Field	Description
source	IP address of the clock source
reference	Reference clock ID of the clock source
	1 If the reference clock is the local clock, the value of this field is related to
	the value of the stra field:
	■ When the value of the stra field is 0 or 1, this field will be
	“LOCL”;
	■ When the stra field has another value, this filed will be the IP
	address of the local clock.
	2 If the reference clock is the clock of another device on the network, the
	value of this field will be the IP address of that device.
stra	Stratum level of the clock source
reach	Reachability count of the clock source. 0 indicates that the clock source in
	unreachable
poll	Poll interval, namely the maximum interval between successive NTP
	messages.