3Com MSR 30 Bw-constraint Sets the bandwidth constraint sub-TLV, Value Sub-TLV in the range 19 to

1642 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS

n	The next hop address cannot be a local public address when configuring the static
	CR-LSP on the ingress or a transit node.
Example	# Configure a static CR-LSP on the transit node, setting its name to tunnel34,
	incoming interface to Serial 1/0, incoming label to 123, outgoing interface to
	Serial 1/1, outgoing label to 253, and required bandwidth to 20 kbps.
	<Sysname> system-view
	[Sysname] static-cr-lsp transit tunnel34 incoming-interface serial 1/0 in-la
	bel 123 outgoing-interface serial 1/1 out-label 253 bandwidth 20
te-set-subtlv
Syntax	te-set-subtlv { bw-constraint value lo-multiplier value unreserved-bw-sub-pool
	value } *
	undo te-set-subtlv { bw-constraint lo-multiplier unreserved-bw-sub-pool } *
View	IS-IS view
Parameter	bw-constraint: Sets the bandwidth constraint sub-TLV.
	lo-multiplier: Sets the sub-TLV of local overbooking multiplier (LOM).
	unreserved-bw-sub-pool: Sets the sub-TLV of unreserved subpool bandwidth.
	value: Sub-TLV in the range 19 to 254.
Description	Use the te-set-subtlvcommand to configure the sub-TLVs carrying the DS-TE
	parameters. As no standard is available for these sub-TLVs, you need to configure
	them manually for interoperability with other vendors’ devices.
	Use the undo te-set-subtlvcommand to restore the default.
	By default, the bandwidth constraint sub-TLV is 252, the sub-TLV of LOM is 253,
	and the sub-TLV of unreserved subpool bandwidth is 251.
Related command:	display isis traffic-engsub-tlvs.
Example	# Configure sub-TLVs for IS-IS process 1.
	<Sysname> system-view
	[Sysname] isis 1
	[Sysname-isis-1] te-set-subtlv bw-constraint 200 lo-multiplier 201 u
	nreserve-bw-sub-pool 202
traffic-eng
Syntax	traffic-eng [ level-1 level-1-2 level-2 ]
	undo traffic-eng [ level-1 level-1-2 level-2 ]