3Com MSR 50 Display mpls te cspf tedb, # Display detailed information about all static CR-LSPs

				1587
Name	FEC	I/O Label	I/O If	Stat
Tunnel0	3.3.3.9/32	NULL/100	-/Eth1/0	Down
Table 404 Description on the fields of the display mpls static-cr-lsp command
Field	Description
Name	Static CR-LSP name
FEC	Forwarding equivalence class (FEC) associated with the destination IP
	address of LSP
I/O Label	Incoming/outgoing label
I/O If	Incoming/outgoing interface
Stat	Current state of the CR-LSP

# Display detailed information about all static CR-LSPs.

<Sysname> display mpls static-cr-lsp verbose

No	: 1
LSP-Name	: Tunnel0
LSR-Type	: Transit
FEC	: -/-
In-Label	: 20
Out-Label	: 30
Ingress LsrId	: 34.1.1.1
Tunnel Id	: 2
In-Interface	: Ethernet1/0
Out-Interface	: Ethernet1/1
NextHop	: 3.2.1.2

Table 405 Description on the fields of display mpls static-cr-lsp verbose

Field	Description
LSP-Name	Static CR-LSP name
LSR-Type	LSR type: ingress, transit, or egress
FEC	Forwarding equivalence class (FEC)
In-Label	Incoming label
Out-Label	Outgoing label
Ingress LsrId	Ingress LSR ID
Tunnel Id	Tunnel ID
In-Interface	Incoming interface
Out-Interface	Outgoing interface
NextHop	Next hop address

display mpls te cspf tedb

Syntax display mpls te cspf tedb { all area area-id interface ip-address network-lsanode [ mpls-lsr-id ] } [ { begin include exclude } regular-expression ]

View Any view

Parameter area-id: Area ID. For OSPF, it ranges from 0 to 4294967295; for IS-IS, it takes the value of 1 or 2.