3Com MSR 50, MSR 30 manual Dhcp Client Configuration Commands

DHCP CLIENT CONFIGURATION

53 COMMANDS

n	■ The DHCP client configuration is supported only on the Layer 3 Ethernet
	interface (or subinterface) and VLAN interface.
	■ When multiple VLAN interfaces having the same MAC address use DHCP for IP
	address acquisition via a relay agent, the DHCP server cannot be the Windows
	2000 Server or Windows 2003 Server.
	■ You are not recommended to enable both the DHCP client and the DHCP
	Snooping on the same device. Otherwise, DHCP Snooping entries may fail to
	be generated, or the DHCP client may fail to obtain an IP address.
display dhcp client
Syntax	display dhcp client [ verbose ] [ interface interface-typeinterface-number]
View	Any view
Parameter	verbose: Specifies verbose DHCP client information to be displayed.
	interface interface-typeinterface-number: Specifies an interface of which to
	display DHCP client information.
Description	Use the display dhcp client command to display DHCP client information. If no
	interface interface-typeinterface-numberis specified, DHCP client information of
	all interfaces will be displayed.
Example	# Display DHCP client information of all interfaces.
	<Sysname> display dhcp client
	Vlan-interface1 DHCP client information:
	Current machine state: BOUND
	Allocated IP: 40.1.1.20 255.255.255.0
	Allocated lease: 259200 seconds, T1: 129600 seconds, T2: 226800 seconds
	DHCP server: 40.1.1.2

# Display verbose DHCP client information.

<Sysname> display dhcp client verbose Vlan-interface1 DHCP client information:

Current machine state: BOUND
Allocated IP: 40.1.1.20 255.255.255.0
Allocated lease: 259200 seconds,	T1: 129600 seconds, T2: 226800 seconds
Lease from 2005.08.13 15:37:59	to	2005.08.16 15:37:59
DHCP server: 40.1.1.2
Transaction ID: 0x1c09322d
Default router: 40.1.1.2