3Com MSR 30, MSR 50 manual Static-cr-lsp ingress

1640 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS

View System view

Parameter Tunnel-name: Tunnel name comprising 1 to 15 characters.

interface-typeinterface-number: Specifies an interface by its type and number.

in-label-value: Incoming label, in the range 16 to 1023.

ingress-lsr-id: Ingress LSR ID, in the format of an IP address.

tunnel-id: Tunnel ID, in the range 1 to 65534.

Description Use the static-cr-lsp egress command to configure a static CR-LSP on the egress node.

Use the undo static-cr-lsp egress command to remove the static CR-LSP.

Example # Configure a static CR-LSP on the egress node, setting its name to tunnel24, incoming interface to Serial 1/0, and incoming label to 233.

<Sysname> system-view

[Sysname] static-cr-lsp egress tunnel34 incoming-interface serial 1/

0 in-label 233

static-cr-lsp ingress

Syntax static-cr-lsp ingress tunnel-name destination dest-addr { nexthop next-hop-addr outgoing-interfaceinterface-type interface-number } out-labelout-label-value

[ bandwidth [ bc0 bc1 ] bandwidth-value]

undo static-cr-lsp ingress tunnel-name

View System view

Parameter tunnel-name: Name of the tunnel, a case sensitive string of 1 to 15 characters. It must be an exact reference to a tunnel created by the interface tunnel command.

next-hop-addr: Next hop address.

outgoing-interfaceinterface-type interface-number: Specifies an outgoing interface for the static CR-LSP.

out-label-value: Outgoing label, in the range 16 to 1023.

bc0: Obtains bandwidth from a subpool.

bc1: Obtains bandwidth from the global pool.

bandwidth-value: Bandwidth assigned to the CR-LSP, in the range 1 to 32000000 kbps.