3Com MSR 30 Accounting-did, Syntax accounting-did Undo accounting-did, View Voice AAA client view

2722 CHAPTER 180: VOICE RADIUS CONFIGURATION COMMANDS

With the RADIUS accounting function enabled, the RADIUS server will perform accounting for all users who use this access number. With the function disabled, the RADIUS server will not perform accounting for users who dial the access number.

Related command: gw-access-number,acct-method, and accounting-did.

Example # Enable the RADIUS accounting function for users who dial the access number 17909.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program

[Sysname-voice-dial] gw-access-number 17909 [Sysname-voice-dial-anum17909] accounting

#Disable the RADIUS accounting function for users who dial the access number 17909.

[Sysname-voice-dial-anum17909] undo accounting

accounting-did

Syntax accounting-did

undo accounting-did

View Voice AAA client view

Parameter None

Description Use the accounting-didcommand to enable the RADIUS accounting function for all one-stage dialing users.

Use the undo accounting-didcommand to disable the RADIUS accounting function.

By default, the RADIUS accounting function is disabled for all one-stage dialing users.

On one voice gateway, the RADIUS accounting for one-stage dialing users is separated from that for two-stage dialing users. This command is applicable to only one-stage dialing users. With this function enabled, the RADIUS server will perform RADIUS accounting for all calls originated by one-stage dialing users. With this function disabled, the RADIUS server will not perform accounting for any calls originated by one-stage dialing users.

Related command: acct-methodand accounting.

Example # Enable the accounting function for all one-stage dialing users.