3Com MSR 50 Import-routeOSPFv3 view, Allow-ibgp direct static cost value type type route-policy

1297

import-route(OSPFv3 view)

Syntax	import-route { isisv6 process-idospfv3 process-idripng process-idbgp4+
	[ allow-ibgp ] direct static } [ cost value type type route-policy
	route-policy-name ]*
	undo import-route { isis process-idospfv3 process-idripng process-idbgp4+
	direct static }
View	OSPFv3 view
Parameters	isisv6 process-id: Specifies a process ID of ISIS to redistribute ISIS routes with the
	process ID, in the range 1 to 65535.
	ospfv3 process-id: Specifies a process ID of OSPFv3 to redistribute OSPFv3 routes
	with the process ID, in the range 1 to 65535.
	ripng process-id: Specifies a process ID of ripng to redistribute ripng routes with
	the process ID, in the range 1 to 65535.
	bgp4+: Specifies to redistribute bgp4+ routes.
	allow-ibgp: Allows redistributing IBGP route.
	direct: Specifies to redistribute direct routes.
	static: Specifies to redistributes static routes.
	cost value: Specifies the cost for redistributed routes, ranging from 1 to
	16777214. It defaults to 1.
	type type: Specifies the type for redistributed routes, 1 or 2. It defaults to 2.
	route-policyroute-policy-name: Specifies to redistribute only the routes that
	match the specified route-policy. route-policy-nameis a string of up to 19
	characters.
	CAUTION: Using the import-route bgp4+ command redistributes only EBGP
c routes, while using the import-route bgp4+ allow-ibgpcommand redistributes
	both EBGP and IBGP routes.
Description	Use the import-routecommand to redistribute routes.
	Use the undo import-routecommand to disable routes redistribution.
	IPv6 OSPFv3 does not redistribute routes from other protocols by default.
Examples	# Configure to redistribute routes from RIPng and specify the type as type 2 and
	cost as 50.

<Sysname> system-view [Sysname] ospfv3

[Sysname-ospfv3-1] import-route ripng 10 type 2 cost 50