66

NAT-PT CONFIGURATION COMMANDS

display natpt address-group

Syntax

display natpt address-group

 

View

Any view

 

Parameter

None

 

Description

Use the display natpt address-groupcommand to display the configuration

 

information of a NAT-PT address pool.

Example

# Display the configuration information of a NAT-PT address pool.

 

<Sysname> display natpt address-group

 

NATPT IPv4 Address Pool Information:

 

1: from 1.1.1.1

to 1.1.1.4

 

Table 183 Description on fields of the display natpt address-group command

 

 

 

 

Field

Description

 

 

 

 

1:

Address pool number

 

from 1.1.1.1

Start address in an address pool

 

to 1.1.1.4

End address in an address pool

 

 

 

display natpt address-mapping

Syntax

display natpt address-mapping

View

Any view

Parameter

None

Description

Use the display natpt address-mappingcommand to display the static and

 

dynamic NAT-PT mappings.

 

The displayed information does not include the information about port translation

 

through the NAPT-PT mechanism.

Example # Display the static and dynamic NAT-PT mapping.

Page 863
Image 863
3Com MSR 50, MSR 30 manual NAT-PT Configuration Commands, Display natpt address-group, Display natpt address-mapping