3Com MSR 30, MSR 50 manual Display ospf interface, View Any view

1120 CHAPTER 76: OSPF CONFIGURATION COMMANDS

Table 266 Description on the fields of the display ospf error command

Field	Description
LS ACK: Unknown LSA type	LSAck packets with unknown LSA type
LS REQ: Empty request	LSR packets with no request information
LS REQ: Bad request	Bad LSR packets
LS UPD: LSA checksum bad	LSU packets with wrong LSA checksum
LS UPD: Received less recent LSA	LSU packets without latest LSA
LS UPD: Unknown LSA type	LSU packets with unknown LSA type

display ospf interface

Syntax display ospf [ process-id ] interface [ all interface-type interface-number ]

View Any view

Parameters process-id: OSPF process ID, in the range 1 to 65535. all: Display OSPF information of all interfaces.

interface-typeinterface-number: Interface type and interface number.

Description Use the display ospf interface command to display OSPF interface information.

If no OSPF process is specified, OSPF interface information of all OSPF processes is displayed.

Examples # Display OSPF interface information.

<Sysname> display ospf interface

OSPF Process 1 with Router ID 192.168.1.1

Interfaces

Area: 0.0.0.0
IP Address	Type	State	Cost	Pri	DR	BDR
192.168.1.1	PTP	P-2-P	1562	1	0.0.0.0	0.0.0.0
Area: 0.0.0.1
IP Address	Type	State	Cost	Pri	DR	BDR
172.16.0.1	Broadcast	DR	1	1	172.16.0.1	0.0.0.0
Table 267 Description on the fields of the display ospf interface command
Field	Description
Area	Area ID of the interface
IP address	Interface IP address (regardless of whether TE is enabled or not)
Type	Interface network type: PTP, PTMP, Broadcast, or NBMA
State	Interface state defined by interface state machine: DOWN, Waiting, p-2-p,
	DR, BDR, or DROther
Cost	Interface cost
Pri	Router priority