3Com MSR 50, MSR 30 manual 133, NAT Configuration Commands, Connection-limit default action

133

NAT CONFIGURATION COMMANDS

connection-limit default action

Syntax	connection-limit default action [ permit deny ]
	undo connection-limit default action
View	System view
Parameter	permit: Enables the connection-limit function globally.
	deny: Disables the connection-limit function globally.
Description	Use the connection-limit default action command to specify the default
	connection-limit action globally, either permit or deny. The effect of this command
	applies to all user connections not defined in the connection-limit policy.
	Use the undo connection-limit default command to restore the default.
	By default, connection-limit is not enabled.
Example	# Configure the default connection-limit action as permit.
	<Sysname> system-view
	[Sysname] connection-limit default action permit

connection-limit default amount

Syntax	connection-limit default amount { upper-limit max-amountlower-limit
	min-amount } *
	undo connection-limit default amount
View	System view
Parameter	upper-limitmax-amount: Specifies the upper limit of connections, in the range 1
	to 4294967295.
	lower-limitmin-amount: Specifies the lower limit of connections, a value smaller
	than the upper limit, in the range 0 to 4294967295.