3Com MSR 50, MSR 30 manual Enable, Ip netstream, Syntax enable, Undo enable

2295

Table 604 Description on the fields of the display ip netstream export command

Field	Description
Version 5 export information	Statistics for exported version 5 statistics
	packets
Stream source interface	Source interface of exported UDP packets
Stream destination IP(UDP)	Destination address and port number of
	exported UDP packets
Exported stream number	Number of exported streams
Exported UDP datagram number(failed number)	Number of exported UDP packets (number
	of failed sending attempts)
Version 8 AS aggregation export information	Statistics for exported version 8 AS
	aggregation UDP packets. Displayed only
	when NetStream aggregation is enabled.
Version 8 tos-source-prefix export information	Statistics for exported version 8 ToS-source
	prefix aggregation packets

enable

Syntax enable

undo enable

View NetStream aggregation view

Parameter None

Description Use the enable command to enable current aggregation mode.

Use the undo enable command to disable current aggregation mode.

By default, no aggregation mode is enabled.

Related command: ip netstream aggregation.

Example # Enable NetStream AS aggregation.

<Sysname> system-view

[Sysname] ip netstream aggregation as

[Sysname-aggregation-as] enable

ip netstream

Syntax ip netstream { inbound outbound }

undo ip netstream { inbound outbound }

View Interface view