3Com MSR 30, MSR 50 manual Authentication-did, Syntax authentication Undo authentication

2724 CHAPTER 180: VOICE RADIUS CONFIGURATION COMMANDS

authentication

Syntax authentication

undo authentication

View Access number view

Parameter None

Description Use the authentication command to enable the RADIUS authentication function for users who dial some access number.

Use the undo authentication command to disable the RADIUS authentication function.

By default, the RADIUS authentication function is disabled for users who dial access numbers.

For each access number, you can specify the RADIUS server to perform authentication for users who dial it. If the authentication function is enabled for users who dial some access number, only users who pass authentication can be authorized to make IP calls. If the authentication function is disabled, users who dial the access number can directly make IP calls no matter whether they are legal.

The authentication function must be enabled before the authorization function. When the authentication function is disabled, the authorization function will automatically be disabled, and meanwhile, the authorization and undo authorization commands will be unavailable.

Related command: gw-access-numberand authorization.

Example # Enable the authentication function for users who dial the access number 17909.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program

[Sysname-voice-dial] gw-access-number 17909 [Sysname-voice-dial-anum17909] authentication

# Disable the authentication function for users who dial the access number 17909.

[Sysname-voice-dial-anum17909] undo authentication

authentication-did

Syntax authentication-did

undo authentication-did