3Com MSR 30, MSR 50 manual Pim require-genid, Pim sm, View Interface view Parameter None

1416 CHAPTER 90: PIM CONFIGURATION COMMANDS

Use the undo pim holdtime join-prunecommand to restore the default setting.

By default, the join/prune timeout time is 210 seconds.

Related command: holdtime assert (PIM view), pim holdtime assert, and holdtime join-prune (PIM view).

Example # Set the join/prune timeout time to 280 seconds on Ethernet1/0.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] pim holdtime join-prune 280

pim require-genid

Syntax pim require-genid

undo pim require-genid

View Interface view

Parameter None

Description Use the pim require-genidcommand enable rejection of hello messages without Generation_ID.

Use the undo pim require-genidcommand to restore the default configuration.

By default, hello messages without Generation_ID are accepted.

Example # Enable Ethernet1/0 to reject hello messages without Generation_ID.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] pim require-genid

pim sm

Syntax	pim sm
	undo pim sm
View	Interface view
Parameter	None
Description	Use the pim sm command to enable PIM-SM.