3Com MSR 50, MSR 30 Data-flow-format Radius scheme view, Gigabyte, Mega-packet, or giga-packet

1951

Description Use the accounting-on enable send command to set the maximum number of accounting-on packet retransmission attempts.

Use the undo accounting-on enable send command to restore the default.

By default, the maximum number of accounting-on packet retransmission attempts is 5.

Note that:

■This command is applicable to centralized devices only.

■Execution of this command does not affect the results of other accounting-on related commands such as accounting-on enable. That is, execution of the undo accounting-on enable interval command will not disable the accounting-on function.

■The maximum number of accounting-on packet retransmission attempts configured with this command takes effect immediately.

Related command: radius scheme, accounting-on enable.

Example # In RADIUS scheme rd, set the maximum number of accounting-on packet retransmission attempts to 10.

<Sysname> system-view

[Sysname] radius scheme rd

[Sysname-radius-rd] accounting-on enable send 10

data-flow-format (RADIUS scheme view)

Syntax data-flow-format { data { byte giga-byte kilo-byte mega-byte } packet

{giga-packet kilo-packet mega-packet one-packet } }*

undo data-flow-format { data packet }

View	RADIUS scheme view
Parameter	data: Specifies the unit for data flows, which can be byte, kilobyte, megabyte, or
	gigabyte.
	packet: Specifies the unit for data packets, which can be one-packet, kilo-packet,
	mega-packet, or giga-packet.
Description	Use the data-flow-formatcommand to specify the unit for data flows or
	packets to be sent to a RADIUS server.
	Use the undo data-flow-formatcommand to restore the default.
	By default, the unit for data flows is byte and that for data packets is
	one-packet.