3Com MSR 50, MSR 30 manual Redirect disconnect, Redirect enable, Undo redirect enable

2465

	<Sysname> system-view
	[Sysname] user-interface vty 0 4
	[Sysname-ui-vty0-4] authentication-mode scheme
	[Sysname-ui-vty0-4] protocol inbound ssh
redirect disconnect
Syntax	redirect disconnect
View	User interface view
Parameter	None
Description	Use the redirect disconnect command to manually terminate a redirected telnet
	connection.
n	■ The redirect commands are supported on the AUX and TTY user interfaces
	only.
	■ Execute the command after using the redirect enable command to enable
	redirection on the user interface.
Example	# Manually terminate a redirected Telnet connection.
	<Sysname> system-view
	[Sysname] user-interface tty 1
	[Sysname-ui-tty1] redirect disconnect
redirect enable
Syntax	redirect enable
	undo redirect enable
View	User interface view
Parameter	None
Description	Use the redirect enable command to enable redirection on the active
	asynchronous serial interface.
	Use the undo redirect enable command to disable this function.
	By default, the redirection function is disabled.
n	■ The redirect commands are supported on the AUX and TTY user interfaces
	only.
	■ To use the redirection function or configure redirection-related parameters, use
	this command to enable redirection on the user interface.